Anycubic Wash & Cure 3 Resin Washing and UV Curing Station

Every resin print needs two steps after it leaves the printer: washing off uncured resin, then curing under UV so the part reaches full strength. The Wash & Cure 3 does both in one compact station, sized for printers with screens up to 7.3 inches, such as the Photon Mono 4.

For washing, prints soak in alcohol in a 3 L basket inside a 4 L bucket, taking parts up to 165 × 100 × 180 mm. The dual-layer basket has two height settings (100 and 165 mm), so small parts are not lost at the bottom. For curing, a turntable sits under ten 405 nm LEDs, curing parts up to 160 × 180 mm (3.18 L), and Anycubic quotes 20% better curing uniformity than the previous model.

A gooseneck UV light reaches into recesses and hollow areas the main LEDs cannot, delivering 30,000 µW/cm² at 1–3 cm. One-touch buttons switch between washing and curing, and a rotary knob sets the timer from 1 to 30 minutes. The unit measures 216 × 217 × 310 mm and weighs 2.7 kg.