Anycubic Wash & Cure 3 Max Automatic Resin Wash and Cure Station – 15.1 L

The Wash & Cure 3 Max is Anycubic’s large, automated post-processing station for big resin printers. It takes parts up to 305 × 165 × 300 mm and fits LCD printers with screens up to 13.6 inches, including the Photon M3 Max and Photon Mono M7 Max, as well as the 10.1-inch Photon P1 and Mono M7 Pro.

Cleaning combines immersion in the lower section with a 360° spray rinse, and the station pumps liquid between separate clean, detergent and waste drums rather than leaving you to decant alcohol by hand. One-click AUTO mode runs the full wash-and-cure cycle (13–42.5 minutes), or you can run WASH (10–39.5 minutes) and CURE (0.5–30 minutes) on their own.

Curing uses 20 × 405 nm LEDs plus a gooseneck light over a 360° rotating platform, with up to 25,000 µW/cm² at 18 cm across a 15.1 L curing space. The machine monitors itself and alerts you if the cover is opened, liquid is flowing in, the outlet is blocked or voltage is low. It measures 434 × 434 × 556 mm and weighs 13.5 kg.