Anycubic Standard Resin V2 1kg – White

Anycubic Standard Resin V2 is the everyday resin for LCD printers, reformulated to be tougher than typical standard resins. Anycubic rates it at 25–30% elongation at break and an Izod impact strength of 192 J/m, so thin features, snap fits and small details are less likely to crack. White gives a clean, bright finish for figurines and décor, and a good base for painting.

It cures at 365–405 nm with a viscosity of 250–350 mPa·s at 25 °C, dissipates bubbles quickly and adheres well to the build plate. Volume shrinkage is 4.3–5.6%, hardness 80–83 HD and tensile strength 35–45 MPa, with low odour in use.

Wash prints in isopropyl alcohol, then post-cure under 405 nm UV; Anycubic’s Wash & Cure stations handle both steps. It is compatible with all 405 nm LCD and DLP resin printers. Wear nitrile gloves when handling uncured resin, and cure any waste before disposal.